This website uses cookies to ensure you get the best experience on our website. Learn more

Copying Stingy's tricks to break his V2 forged carbon frame

x

Copying Stingy's tricks to break his V2 forged carbon frame

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

When you're not afraid to break your gear, you push yourself harder and become a better pilot. I'm putting that theory to the test today. I tried to break the Stingy V2 Forged Carbon frame by imitating Stingy's tricks. Let's see how the frame holds up to the abuse!

Full playlist for this build is:

--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

Purchase the Stingy V2 Forged Carbon frame at:
* XHover -
* GetFPV -

Purchase the standard carbon Stingy V2 at:
* GetFPV -
* ReadyMadeRC -
* Catalyst Machineworks -

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

Freestyle Kwad Build - Part 1 - Stingy V2 Forged Carbon / Xing 2208 / F55A / SPRacing H7

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Follow along as I build a freestyle kwad with Stingersswarm V2 frame, Xing 2208/2450kv motors, T-Motor F55A ESC, and SPRacing H7 Ultimate FC.

Full playlist for this build is:

Wiring diagram by Philipp Seidell at:

--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

Purchase the Stingy V2 Forged Carbon frame at:
* XHover -
* GetFPV -

Purchase the standard carbon Stingy V2 at:
* GetFPV -
* ReadyMadeRC -
* Catalyst Machineworks -

Purchase the Xing 2208 / 2450kv motor at:
* GetFPV -
* RaceDayQuads -
* Banggood -
* Amazon -

Purchase the T-Motor F55A Pro II at:
* RaceDayQuads -
* GetFPV -
* Banggood -
* Amazon -

Purchase the SPracing H7 Extreme at:
* SeriouslyPro -
* GetFPV -

Purchase the Vifly Finder V2 at:
* RaceDayQuads -
* Bangood -
* Amazon -

My screw and standoff assortments are:
* Cap head M3 screw -
* Button head M3 screw -
* M3 nylon standoff -

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.
x

Freestyle Kwad Build - Part 5 - Stingy V2 Forged Carbon / Xing 2208 / F55A / SPRacing H7

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Follow along as I build a freestyle kwad with Stingersswarm V2 frame, Xing 2208/2450kv motors, T-Motor F55A ESC, and SPRacing H7 Ultimate FC.

Full playlist for this build is:

Wiring diagram by Philipp Seidell at:

--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

Purchase the Stingy V2 Forged Carbon frame at:
* XHover -
* GetFPV -

Purchase the standard carbon Stingy V2 at:
* GetFPV -
* ReadyMadeRC -
* Catalyst Machineworks -

Purchase the Xing 2208 / 2450kv motor at:
* GetFPV -
* RaceDayQuads -
* Banggood -
* Amazon -

Purchase the T-Motor F55A Pro II at:
* RaceDayQuads -
* GetFPV -
* Banggood -
* Amazon -

Purchase the SPracing H7 Extreme at:
* SeriouslyPro -
* GetFPV -

Purchase the Vifly Finder V2 at:
* RaceDayQuads -
* Bangood -
* Amazon -

My screw and standoff assortments are:
* Cap head M3 screw -
* Button head M3 screw -
* M3 nylon standoff -

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

Xhover Stingy Forged Carbon Edition Is Finally Here!!

Preorder your Forged Stingy TODAY!!!

All neW GEar LiSt: cHecK iT OuT!!
BrainFPV Radix Li:
Aikon 35A 4 in 1:
All my 3D printed bits:
cmid=eHZ3Y2tBWGYrQWM9&afid=UVF4ZHlDS3UyWVk9&ats=UmRlS1FTZWpsOVU9
Stingy V2 Forged:
Stingy Hypetrains:
Runcam Micro Swift with uart and I'm lazy Poooh!!
HQ 5.1x4.1x3 V1S:
GoPro Hero 7 Black:
Rapid Fire Video RX:
Fatshark HDO Goggles:
TBS Crossfire Transmitter:
Crossfire nano RX:
Drone Side FPV Antennas:

Goggle RX Antennas:

Torvol Quad Pitstop Pro:
Ethix Prop Bag:
Peak Design Capture:
Flat Double sided Sticky:
Cocoon Grid it:
TS100 Cable:
TS100:
Kriega tool roll:
Filter Holder:
Breakthrough ND Filter:
Bose Soundlink Micro:
All my 3d prints are from:
DJI Mavic Air:
Sigma 35mm F1.4 Art:
Sigma 20mm F1.4 Art:
Sony 90mm F2.8 Macro:
Firehouse Drone anti collision light:
Pitmode coffee cup:
Freewell ND filters:
Peak Design Wrist strap:
Topsky FPV Watch:
Aputure AL/MX Adjustable LED Panel:
Samsung T5 Solid state Drive:
ImmersionRC Mini Patch:
Fatshark HDO Rapid fire bundle:
ISDT battery checker:
Infinite Divider nic nacs bin:
Dark Knight Nirvana:
Micro SD Card holder:
Crescent Needle nose and flush cutter:
Fav Prop Tool:

Artist: Laxcity
Song: Good Morning

Artist: Red Llicorice
Song: I Know

Artist: Graffiti Ghost
Song: Last Man Standing

Artist: Oh the Larceny
Song: About to get Crazy



#Xhover #ForgedCarbon #FPVFREESTYLE #FPV
x

Metal screws for ESC and FC: Dangerous or Safe? BUILD TIP

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Is it safe or dangerous to use metal screws to mount your ESC and flight controller? The answer is... it's usually safe. But not always.

The First Ever Backward Power Loop!!! Cricket Vs. Stingy Round Two

The battle continues as Cricket and Stingy try to pull off the first-ever backward​ power loop!
Pre-order your Forged Stingy TODAY!:
Power Loop Shirt:

Botgrinder's Video:
Go tell Cricket to finish his edit:

All neW GEar LiSt: cHecK iT OuT!!
Forged Carbon Stingy V2:
Xilo Stax:
All my 3D printed bits:
cmid=eHZ3Y2tBWGYrQWM9&afid=UVF4ZHlDS3UyWVk9&ats=UmRlS1FTZWpsOVU9
Stingy V2:
Zip 2407 1700kv:
Runcam Micro Swift with uart and I'm lazy Poooh!!
HQ 5.1x4.1x3 V1S:
GoPro Hero 7 Black:
Rapid Fire Video RX:
Fatshark HDO Goggles:
TBS Crossfire Transmitter:
Crossfire nano RX:
Drone Side FPV Antennas:

Goggle RX Antennas:

Torvol Quad Pitstop Pro:
Ethix Prop Bag:
Peak Design Capture:
Flat Double sided Sticky:
Cocoon Grid it:
TS100 Cable:
TS100:
Kriega tool roll:
Filter Holder:
Breakthrough ND Filter:
Bose Soundlink Micro:
All my 3d prints are from:
DJI Mavic Air:
Sigma 35mm F1.4 Art:
Sigma 20mm F1.4 Art:
Sony 90mm F2.8 Macro:
Firehouse Drone anti collision light:
Pitmode coffee cup:
Freewell ND filters:
Peak Design Wrist strap:
Topsky FPV Watch:
ImmersionRC Mini Patch:
Fatshark HDO Rapid fire bundle:
ISDT battery checker:
Infinite Divider nic nacs bin:
Dark Knight Nirvana:
Micro SD Card holder:
Crescent Needle nose and flush cutter:
Fav Prop Tool:

Artist: Midnight Riot
Song: I Wanna Start A Fire

Artist: Summer Kennedy
Song: Oh My

Artist: Midnight Riot
Song: Beat Drop

#FPV #FPVFREESTYLE #Xhover
x

I tried to break Taq's Flynoceros Skoll V3 and it laughed at me

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Taq invited me out to Chattanooga to check out his new Flynoceros Skoll V3. Little did he know I was going to challenge him to a freesytle contest and try to break it.

The problem with vertical side plate frames has always been that the method of joining them to the bottom plate is a weak spot. The Skoll V3 has a novel method using a TPU shim that goes through the bottom plate. In addition to being completely secure, it provides vibration isolation to the camera.

Taq's YT channel is:

--- PRODUCT LINKS ---

Purchase the Skoll V3 at:

Why two omni antennas vs. omni and patch?

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Why are some pilots using two omni antennas on their diversity modules, instead of an omni and a patch? Here's why. And when should you use two omnis, and when is an omni and a patch better?

--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

Check out the new line of Axii 2 antennas at:

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

How To 10 FPV Freestyle Tricks YAW SPIN WITH STICKS OVERLAY

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---


--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

How To 10 FPV Freestyle Tricks | LEARN THESE FIRST

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Here are the first ten FPV freestyle tricks you should learn. These tricks teach fundamental skills that build on each other to make you a better FPV Pilot!

For more detail on these tricks, watch my whole Tricks Tutorial playlist at:
x

Learn To Build a Racing Drone - Part 2 - Frame Assembly

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

I've created a video series that shows even a total beginner how to build an FPV quadcopter. The videos show every single step of building and setting up the drone, in the kind of meticulous (but still easy to follow) detail that I'm known for. If you've got any questions, JB is monitoring the YouTube comments, and there is a Discord server chat channel for more immediate help.

This video series is about more than just giving you a finished quad that you can fly. It's about teaching you how to build a quad, the right way, including all the little steps that are often overlooked.

The full playlist for this build series is:


---

Purchase this full kit at Rotor Riot store:


Unfortunately, the Rotor Riot kit version of this build has been out of stock for a long time, so I am putting up individual links to the parts. You will need to purchase them separately if you want them.

1x Rotor Riot CL1 frame
* Rotor Riot Store -

1x Holybro Kakute / Tekko / Atlatl stack
* Banggood -
* RaceDayQuads -
* Rotor Riot -
* GetFPV -

1x Foxeer Pagoda video antenna (or equivalent)
* RaceDayQuads -
* Rotor Riot Store -
* Banggood -

4x DYS Samguk Wei 2207/2600 kv motors (buy a spare or two!)
* Rotor Riot Store -
* RaceDayQuads -
* Banggood -
* GetFPV -

1x Foxeer Micro Arrow Pro FPV camera
* Banggood -
* RaceDayQuads -
* Rotor Riot -
* GetFPV -
* Amazon -

DYS Cyclone 5046x3 props (as many as you can manage)
* Banggood -
* ReadyMadeRC -
* GetFPV -
* Amazon -

Pre-soldered XT60 power lead
* Amazon -
* GetFPV -
* Rotor Riot -
* RaceDayQuads -
* Banggood -

M3 Screw assortment (use 4mm or 5mm for the FC stack and 8mm for the motors).
* RaceDayQuads -
* Rotor Riot Store -
* GetFPV -
* Amazon -
* Banggood -

In addition, you will need to source the following:

* Zip ties, 8 length (to hold antennas and receiver)
* Heat shrink, 3/32 diamter, 2 length, quantity 2 (4 total length)
* Double sided tape for receiver, 1/2 x 1 -- use double-sided foam tape, servo tape, Scotch Extreme Mounting Tape, or similar.

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

SoPro Flow

Check Out Kwad Camp Online


Get yourself a set of Hypetrain StingersSwarm motors here:


Stingy shirt:
Stingy Twitch:

Song: Desire
Artist: Chuuwee

Frame: The Xhover Stingy V2 Prototype

Stingy Hypetrains
Flightone millivolt OSD:
Spark 32:
Runcam Swift Micro V3:
HQ 5x4.5x3 V1S PC version
lumenier
GoPro Hero 6 Black
Video Reciever Laforge:
Fatshark HDO
VTX ImmersionRC Tramp
TBS Crossfire
Crossfire tuned antenna
Crossfire nano RX

Gear
Evolve Carbon GT AT:
Wireless BeatsX headphones:
Sony RX 100 V
Jobi tripod:
Bag:
Speaker: Braven BRV X
Chair:
Battery Pack: Anker Powercore +
Lipo Checker:
USB and USB-C SD card reader:
flashlight:
Solid state drive:
GoPro Lens Protector:
XT60 to USB:
Immersionrc Tramp:
Tiny Whoop Case:
Laforge RX:
8dbi antenna:
Mad mushroom antenna:
Soldering Iron:
Taranis Case:
Taranis:
Venom 1300mah 4s 75c
Macbook sleeve:
Macbook:
x

ImmersionRC RF Power Meter Rotor Riot Edition

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Rotor Riot has released a custom edition of the ImmersionRC RF Power Meter. What's the difference between the RR edition and the IRC edition? As long as we've got it out, let's use it to test the output power of some video transmitters.

The ImmersionRC RF Power Meter v2 finally puts ACCURATE power measurement within reach of hobbyists. This tool is essential for anybody running FPV drone races. Or if you're just a nerd who likes testing video transmitters and other types of radios.

The v2 power meter beats the v1 in several ways. It's smaller. it has a built-in battery. It has a few new modes. And it's CALIBRATED from the factory to be ACCURATE, including a build-in load resistor, which was a source of serious inaccuracy in the v1 meter.

--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

Purchase the ImmersionRC RF Power meter V2 at...
* Rotor Riot (adapters included) -

Same price, adapters not included at:
* Banggood -
* GetFPV -
* ReadyMadeRC -
* RaceDayQuads -

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

FPV Drone Frames Under $25 // On-Budget-List

PCBWAY Best Place for PCB's:
hskrc hsk210 210mm:
hskrc foss 210:
martian 215 215mm:
hskrc floss 2 215mm:
uruav nex220 220mm:
hskrc lx215 215mm:
hskrc joker v2 225mm:
hskrc vo235 235mm:
hecate5' 5 inch 230mm:
hskrc lhx218 218mm:
witcher 5inch 230mm:
skyzone s215 215mm:
sonic 5 225mm:
slamnasty 207mm:
union rc falcon 220:
venom 5 inch 235mm:
alien slam 5 225mm:
ql5 v2 235mm:
alfarc raptor tx 5 inch:
uruav cx240 240mm:
realacc x210 214mm:

Consider Following me and supporting on Patreon.


----------------------------------------------------------
-- TOP 30x30 4in1 ESC --

Aikon AK32
BG:
GetFPV:
RDQ:

Tekko32 Metal
BG:
GetFPV:
RDQ:

T-Motor F55A
BG:
GetFPV:
RDQ:

T-Motor F45A
BG:
GetFPV:
RDQ:

Dalrc Rocket
BG:
GetFPV:
RDQ:


-- Best 20x20 4in1 ESC In Order From Best --
HGLRC Forward
BG:
GETFPV: N/A
RDQ:

Aikon AK32 Mini
BG:
GetFPV:
RDQ:


Airbot Ori32
BG:
GETFPV:
RDQ:


Need Help with something?



Make sure to sign up to the newsletter and create an account to not miss big insane sales.


Android APP


IOS APP


Follow me on Facebook

------------------------------------


I highly recommend these products if unsure

Tekko32


kakuteV2 AIO


Hakcrc (Best Budget ESC)


25km Range on these awesome VTX's

FX2


X2



---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)


Batteries I use


Camera I use


Standoffs I find to be the best


Xt60 Premade I use


Heat shrink I mentioned


Soldering station






Contact: mesh.drone@gmail.com

---------------------
Song Used


------------------------------------


Song Used info
Track was provided by NoCopyrightSounds

Paul Flint - Savage [NCS Release]


Paul Flint




• Mastering by


Song: Distrion & Alex Skrindo - Lightning [NCS Release]
Music provided by NoCopyrightSounds.
Watch:
Download/Stream:

ID: dj2938hd298hflahsknckdfhsidufh9398

65 Tech Tips For FPV Pilots | YOU DON'T KNOW #40 I GUARANTEE IT

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

I'm doing a list video! 65 Tech Tips for FPV Pilots! You'll know about some of these, but I bet most of them will surprise you!

For more info about these tips...

#7 - Why two omni antennas work better sometimes


#18 - How to set up Crossfire LQ / RSSI in Betaflight


#19 - Crossfire emergency update procedure


#24 - Props-in vs. Props-out


#25 - How to set up a Prearm mode


#25 - How to set up 2-switch arming


#33 - How to do the L1 inductor mod


YOU ALSO NEED TO DO THE SAME MOD TO THE L10 INDUCTOR. The L10 inductor is on the top side of the DVR board, on the left side of the board. The DVR board is in the top half of the goggle shell. The L10 inductor is quite large and I recommend simply jumper-ing it with a wire, instead of trying to remove it.

#34 - FPV flight line best practices


#36 - How to set up all your aircraft on the same model


#55 - How to set up turtle mode


#57 - How to remove ratchet from Taranis


#64 - How to build a smoke stopper
x

Fatshark Fan Mod and Opening Up The Optics (DON'T DO THIS!)

Watch me do something really dumb with my Fatshark Dominator HD2 goggles. Also, I'll show you the mod that lets your face-plate fan run without having to plug in your balance plug.

Spare 2S balance plugs can be bought here:

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Amzn.to links above are affiliate links, and I will receive compensation if you use them.

Jumper T16 Crossfire Doesn't Work FIRMWARE BUG EASY FIX

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

When I did the internal multiprotocol module conversion on my Jumper T16, Crossfire didn't work. Was my mod to blame? NO! Here's why it didn't work and how to fix it.

Download Jumper firmware from:

Download OpenTX companion from:


--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

The Jumper T16 is not available in many popular stores. Some dealers have reported to me that FrSky pressured them not to carry the Jumper. This may be why the Jumper T16 is hard to find.

The official Jumper store is on Alibaba at:

Purchase the Jumper T16 MultiProtocol Radio Transmitter at:
* Alibaba -
* Hobbycool -
* Amazon -
* Pyro-Drone -
* Grayson Hobby -

Purchase the Jumper T16 internal multiprotocol module at:



To tell if you need the multiprotocol module, look at whether the product picture has the antenna mounted in the top of the radio like in my video, or whether the radio has a dummy plug at the top of the radio. If the radio has an antenna sticking out its top, then it already has the multiprotocol module installed.

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

New JB 2208 motor vs. original 2407 which is better

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Which is better? My new JB 2208 motor or the original 2407? The answer depends on what you're looking for. Both provide smooth, propwash-free handling even with high-pitch props. To understand what makes them different, we'll need to dig a little deeper.

--- PRODUCT LINKS ---

Purchase the JB 2208 motor at:
* GetFPV -

Purchase the JB 2407 motor at:
* GetFPV -

My preferred prop for this motor is the Gemfan Hurrican 51499. Links to purchase are at:

What Does A Failing ESC Look Like? IT LOOKS LIKE THIS.

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

A failing ESC doesn't always mean your quad falls out of the sky in a death-roll. When an ESC has just one bad FET, it can cause weak motor response that flies fine most of the time... except when you go to full throttle. In this video, I'll show you exactly what that looks like, including blackbox traces and stick overlay.

For a more in-depth blackbox analysis of a bad motor:


--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

The ESC that I'm using in this video is the DALRC Engine, which I have had two out of two of them die on me after way too short a time so I'm not linking to them. Instead you should buy the Aikon AK32.

Purchase the Aikon AK32 at:
* RaceDayQuads -
* Rotor Riot -
* GetFPV -
* ReadyMadeRC -

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

HOW TO WATERPROOF YOUR DRONE | DryDrone vs Silicone Conformal Coating

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:

SUPPORT ME ON PATREON at:

THIS IS MY FULL TIME JOB. Here are other ways that you can support me:

---

Moisture will ruin your drone electronics. If you fly in wet environments, you need to waterproof your drone. The usual way of doing it is with silicone conformal coating. But there's a new product, Drone Dry, which is better than conformal coating in some ways. Let's compare the two and learn which is the best way to waterproof your quadcopter.

--- PRODUCT LINKS ---

I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.

Purchase DryDrone Shake 'n Bake at:
* FPV Racing Products -
* FlyBy Academy -
* NG Hobbies -

Purchase Silicone Conformal Coating at:
* Amazon -

MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Most or all links above are affiliate links, and I will receive compensation if you use them.

Shares

x

Check Also

x

Menu