This website uses cookies to ensure you get the best experience on our website. Learn more

Homemade Air gun valve 2 Simply the best

x

How To Make a One-Way Check Valve - For Cheap!!

The most expensive parts of a water pump, or DIY Super Soaker, are usually the check valves. In this project, we're making some from scratch, for as little as $0.35 each.

Endcard Links:

Water Pump:
Rocket Rifle:
Candy Cannon:
Butter Candle:

See What Else I’m Up To:

Instagram:
Facebook:
Pinterest:

Business Inquiries: For business and sponsorship inquiries please contact us directly:

WARNING:

The pressure tests and claims made on these check-valves is based solely on my personal experiences with the ones demonstrated in the video. Individual results may vary, and caution and care should be taken when loading the valves with high pressure. The risk of higher pressures is that the balls may be forced from the adaptor, shooting out like projectiles. High pressures may also cause the ball to lock up, preventing normal operation of the valve, or possibly even structural failure of the valve altogether. These valves are not made, or claimed, to be used in any heavy duty operations. Use of this content is at your own risk.

Music By: Music by Jason Shaw (TU-GetAMoveOn)

Project Inspired By:

WaterWolf

Project History & More Info:

I wanted to build a PVC water pump, but the check valves were around $10.00 each. That seemed a little steep for a PVC build, so while looking for alternative options, I settled on this design, which is about the cheapest, while still being practical and useful, that I could imagine.

In my testing, the valves work great with air and water. Air pressures up to 60PSI seemed to be fine for normal operation, while pressures above 60PSI occasionally caused the ball to lock into the O-Ring, and required substantial back-pressure to unlock it.

If you try using rubber bouncy balls as the valve mechanism, only use them in very low pressure applications like blowing up balloons, and possibly for improvised water guns. Relatively high pressures used with these balls seems to eventually force them out of the adaptor, and can shoot them out at surprising velocities.

Overall, I'm really happy with the valves because they can be fit into any part of a PVC system, and can be duplicated quickly, easily, and for very very low cost.
x

How to Make the Easiest Check Valve at Home (One Way Valve)

In this video i will show you how to make the easiest check valve (one way valve) at home using household items.

Great for small projects,air pumps,water pumps,aquariums,fountains etc.

Like my Facebook page:


Don't forget to comment,rate and subscribe!

Music:
OctoBlues Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
x

Tutorial PCP dengan QEV quick exhaust valve Pneumatic

x

How to make Air Gun at home Easy & Powerful

How to make Air Gun at home Easy & Powerful
Please Subscribe to watch more

Thanks for watching!
x

Making Face Mask from Basic Materials

Making Face Mask from Basic Materials

In today's video I show how to make simple but very effective face mask from plastic bottle and rubber gloves. This mask has 2 air filters that can be easily replaced and used again. Take care!

If you like this video - don't forget to subscribe :)
Production Music courtesy of Epidemic Sound

Airgun / PCP 0-Ring Seals Pt. 2-3

A video to inform you a little more about O-rings seals. The most vital part of your PCP airgun that you never think about - Until your airgun leaks.

If you are unable to get the correct size O-ring seals for your job, the part / s are out of standard specification range, not perfectly round or you cannot polish all the marks out of the inside of your air reservoir / tanks bore & so affecting an air tight seal with correct O-rings is proving impossible. Here are some hopefully helpful tips to see you on your way to success.

Airgun Regulators Available For Many PCP's By Contact this You Tube Channel

or Ebay: AirRegulators

or email: Airgun.Regulators@aol.com

PTFE Information:

Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene that finds numerous applications. The best known brand name of PTFE is Teflon by DuPont Co.

PTFE is a fluorocarbon solid, as it is a high-molecular-weight compound consisting wholly of carbon and fluorine. PTFE is hydrophobic: neither water nor water-containing substances wet PTFE, as fluorocarbons demonstrate mitigated London dispersion forces due to the high electronegativity of fluorine. PTFE has one of the lowest coefficients of friction against any solid.

PTFE is used as a non-stick coating for pans and other cookware. It is very non-reactive, partly because of the strength of carbon--fluorine bonds, and so it is often used in containers and pipework for reactive and corrosive chemicals. Where used as a lubricant, PTFE reduces friction, wear, and energy consumption of machinery. It is also commonly used as a graft material in surgical interventions.

It is commonly believed that Teflon is a spin-off product from the NASA space projects. Though it has been used by NASA, the assumption is incorrect.[2]

‘Lane MK9 Lancet Regulator Kits' FREE Worldwide Tracked Air Mail Shipping - Available From: / / Or email the office at: airgun.regulators@aol.com

To learn more about air gun regulators - simply watch more videos on this channel or go to Face Book:

‘Lane Lancet Regulators’ are used in 144 countries all over the globe as of 2019, and have been fitted into 35 makes of air gun and over 180+ different models.

Build Info For 36/50 caliber 20/28 Shot Breach/Muz

Pics and additional info can be viewed on Spudfiles.com under pneumatic cannon showcase and in this discription. Homemade totally off the shelf re-purposed muzzleloader. It's being fired with 250 to 300 psi air from a good quality 250 psi stirrup pump or my re-purposed 30# propane tank with pop-off protection set at 315 psi or a 20# propane tank with pop off set at 375 psi. The 300 to 400 psi air is obtained by piggybacking an R-22 compressor onto a 120 psi shop air compressor. The lowest pressure rated component in the system is the Alpha QEV rated at max 250 psi with a burst pressure of 2 to 3 times that. With a properly rated homemade piston valve the operating pressure could easily be quadrupled. A .495 ball is just large enough to feed through the 1/2 opening in the receiver. The QEV is an Alpha 5UPH4. The trigger is a 1/8 push button vent valve used as a pilot valve. This gun is also a fine arrow launcher and conical bullet muzzle loader. It makes a pretty decent shotgun at 10 to 15 yards with a 184 to 552 grain shot load. i have added a CO2 system and am firing it at 400 psi now. You don't have to use a schrader, foster, quick connect or ball valve on the supply air to the QEV if you use a small orifice in that fitting. The orifice will prevent the supply air from interfering with the venting of the 1/8 vent valve since it slows down the pressure build up to the accumulator tank which allows the vent valve to stay ahead of any pressure buildup on the pilot side of the QEV. By keeping supply pressure on the pilot side of the QEV at all times during firing the safety of the QEV is way mo betta! This gun also has only three moving parts to keep it simple reliable and easy to build. It is reminiscent of the the Red Ryder gravity fed bb guns. Remember if you add a spring a large portion of the magazine is wasted. Also since you have to wait a couple of seconds for the accumulator to recharge anyway you can use this time to tip the gun and gravity feed a round. Just keeping it simple. The annular space around the bolt is so small I had to sand the bolt down for a smooth fit and the stainless steel tee has a smooth and consistent diameter throughout. Also the volume of air in the chamber overwhelms the tiny amount of leakage around the bolt. I actually shot a single shot with the bolt out and the receiver hole plugged tight and didn't get a noticeable difference in performance. The tiny amount of air escaping there also helps
to keep the tight fitting bolt clean. I guess this wouldn't work too good if the gun was using 3000 psig air and only burping out a few cc's of air by hammer valve action. It's much less problematic to spew out 10cc's of 300 psi air than 1cc of 3000 psi air. You have the same amount of energy in each release. simply make the bullet larger in diameter to harness the lower pressure.

How to create a good Airgun / Air Gun! Tips & Tricks

Some handy tips for getting maximum powered airguns.

Music: Outcast - Hey Ya

FREQUENTLY ASKED QUESTIONS:

My ammunition keeps rolling out of my barrel, how do I solve this?

how I solved that problem:

1. if you have a barrel with a loading hole in it. (to put marbles and ball bearings in)

you can simply solve this problem with a drop of glue. you put the ball bearing in and it will be prevented from rolling by a bit of glue blocking it. (make sure you can still shoot, not too much glue!)


I use this for my first advanced airgun.

2. If you have a metal or even plastic barrel with no loading hole. simply squize the barrel a little bit so the ammunition gets stuck weherever you want.

I use this on all of my airguns exept the first advanced.

Make a 2L Coke Bottle Air Tank (Upgraded Version)

►Subscribe!

►T-shirts & Hoodies!

An upgraded, more powerful (up to 90psi), DIY pop bottle air tank
See the first, and more simple version of this

Support my work!:

Subscribe to my channel!

Follow me on Twitter!

Follow me on Google+

How to make compressed air tank simple

DIY - compressed air tank mini at home
Materials to include
- small electric air compressor 12v
- Pressure Gauges, screws, Rubber Tubing
- 8 x valve bike, handles, iron 14x14mm
- 4 x water bottle, Wood
- Accu 12v, wire, jack DC 12v
- iron wire, rubber
x

'Lane Regulators' Basic Principals of Airgun PCP Regulation (Old Video).

A 'Regulator' just provides a sauce of 'Air' at a 'Near Constant Pressure' to the 'Outlet Valve Assembly'. A 'Regulator' can be simply installed with good effect into most airguns, improving shot count and shot to shot FPS (Feet Per Second) consistency, with the minimum amount of alterations.

However to extract every last possible shot available from the energy stored in the 'Reservoir (Tank)' can be very fiddly and time consuming process. Regulation to a profession standard is more of a skill / art learned through practice, more than it is a science.

Unless your days are spent 'Regulating' exactly the same make of rifle day in day out, you are likely to find that each Make & Model can be quite different.

Hopefully I will do a (Part 2 - Maybe 3) two this video and talk in more detail about what your Power Graphs tell you about your regulator fitting and how to alter it and how to get better FPS from your Airgun & Regulator for FT Shooting.

Thank You - For watching and I hope the Hammer & Nails thing made sense. Trying to make a video for both those new to airgun shooting, more knowledgeable shooters and many of my subscribers world wide whom do not speak English is hard.

‘Lane MK9 Lancet Regulator Kits' FREE Worldwide Tracked Air Mail Shipping - Available From:
/ / Or email the office at: airgun.regulators@aol.com

To learn more about air gun regulators - simply watch more videos on this channel or go to Face Book:

‘Lane Lancet Regulators’ are used in 144 countries all over the globe as of 2019, and have been fitted into 35 makes of air gun and over 180+ different models.

Spanish
‘Lane MK9 Lancet Regulator Kits 'Envío mundial de correo aéreo de seguimiento GRATUITO - Disponible desde:

/ /

O envíe un correo electrónico a la oficina a: airgun.regulators@aol.com

Para obtener más información sobre los reguladores de pistola de aire comprimido, simplemente mire más videos en este canal o vaya a Face Book:

Los ‘Lane Lancet Regulators’ se utilizan en 144 países de todo el mundo a partir de 2019, y se han instalado en 35 marcas de pistola de aire y en más de 180 modelos diferentes.

Italian

'Lane MK9 Lancet Regulator Kits' Spedizione in tutto il mondo GRATUITA per posta aerea tracciabile - Disponibile da:

/ /

O invia l'email all'indirizzo: airgun.regulators@aol.com

Per saperne di più sui regolatori delle pistole ad aria compressa: guarda semplicemente più video su questo canale o vai su Face Book:

I Lane Lancet Regulators sono utilizzati in 144 paesi in tutto il mondo a partire dal 2019 e sono stati installati in 35 marche di fucili ad aria compressa e oltre 180 modelli diversi.

German
KOSTENLOSER weltweiter Tracked Air Mail 'Lane MK9 Lancet Regulator Kits - Verfügbar ab:

/ /

Oder senden Sie eine E-Mail an das Büro: airgun.regulators@aol.com

Um mehr über Luftgewehrregler zu erfahren, schauen Sie sich einfach weitere Videos auf diesem Kanal an oder besuchen Sie Face Book:

Lane Lancet Regulators werden ab 2019 in 144 Ländern weltweit eingesetzt und in 35 Luftgewehr-Hersteller und über 180 verschiedene Modelle eingebaut.


Turkish
'Lane' Regülatör Setleri tüm ÜCRETSİZ Dünya Hava Posta Kargo bulunur. Airgun.regulators@aol.com - ofiste doğrudan veya bize e-posta - Internet Mağazaları - Sen ebay dan satın alabilirsiniz

'Lane' düzenleyiciler dünyanın her yerinde 100 ülkede kullanılan ve hava tabancası 31 marka ve üzerinde 120 farklı model içine monte edilmiştir.

Https:// hava tabancası regülatörleri sadece bu kanalda daha fazla video izlemek ya da yüz kitap sayfasını ziyaret hakkında daha fazla bilgi için


Indonesian
‘Pengiriman Pengiriman Pesan Udara Berlacak Jalur MK9 Lancet Regulator Kit Seluruh Dunia - Tersedia Dari:

/ /

Atau kirim email ke kantor di: airgun.regulators@aol.com

Untuk mempelajari lebih lanjut tentang regulator pistol udara - cukup tonton lebih banyak video di saluran ini atau buka Face Book:

'Regulator Lane Lancet' digunakan di 144 negara di seluruh dunia pada 2019, dan telah dipasang pada 35 merek senapan angin dan lebih dari 180+ model berbeda.

How to build ● a 2L Bottle Air Tank

This 2L pop coke bottles is a lightweight and easy way of storing compressed air! Use it instead of canned air. It's easy with one 2L pop soda bottle. Assembly is simple using a 2L soda bottles and rubber valve insert from a tubeless tire. No special fittings needed. Use hose to connect to the 2L coke bottle together. Great for hobbyists and I.T. techs for dust removal and debris blow off from projects. Perfect canned air alternative. Is refillable and rechargeable canned air. Dust off electronics or makes a great computer cleaner. My upcoming project will be a mega 2L coke pop soda bottle air tank where I take 36 2L coke soda pop bottles and make an even simpler air tank.
These bottles are very strong but please do your research before inflating to determine a safe working pressure that you will feel safe with. People are creative and will come up with different ideas on how to use this so be safe.
See how much pressure they can take ....

USA
● Air Hose Coupler ....
● These Stepper Drills Works Even Better ....
● My Great Little Cordless Drill ....
● Air Blower Gun ....
● Small Hose Clamps ....
● Tubeless Tire Valves ....

CANADA
● Air Blower Gun ....
● Air Hose Coupler ....
● Small Hose Clamps ....
● Tubeless Tire Valves ....
● Step Drill Bit Set (these work way better than the ones in the video) ....

Full transparency! I am an Amazon affiliate. A small portion of each sale helps support my channel, which is very much appreciated! Thank you!

How to Apply Two Coats When Powder Coating - Motorcycle Stunt Cage Powder Coating - Eastwood

In this video Beau Sprays Two Coats of Powder on a Motorcycle Stunt Cage! He Sprays Hotcoat Appliance White powder as a base coat and top coats it with atomic yellow powder!

Start Powder Coating:

Buff Wheel :

Dual-Voltage HotCoat Powder-Coating Gun gives you the most complete coverage from tight areas to large surfaces.

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical
Versatility with 2 settings
Low 15,000-volt setting
High 25,000-volt setting for multi-coat coverage over larger areas
Increased powder adhesion
Minimal overspray
This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. The new Dual Voltage system gives you the capability to coat small areas using the Low 15kv setting. Or coat large areas using the High voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) and an electric oven or toaster oven.

The Dual Voltage HotCoat gun is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

HHO Generator - Water to Fuel Converter

For this project let's build a sexy looking generator that uses electricity to convert water into an extremely powerful fuel! Here's how to build an Oxy-Hydrogen generator from scratch.

[✓] Solar Panels:
[✓] 4” ABS clean out fittings:
[✓] 3/8” Poly Tubing:
[✓] 100 grit sandpaper:
[✓] Clear silicone 1 caulk:
[✓] Rubber Mallet:
[✓] ABS Cement:
[✓] 1/4” 90 degree Elbow:
[✓] 1/2” drill bit:
[✓] 18 Thread TAP:
[✓] Pipe Tape:
[✓] 3/8” Swivel Elbow:
[✓] 5/16 drill bit:
[✓] Bench vice:
[✓] Stainless steel jam nuts:
[✓] Acrylic glue:

I've been getting a lot of requests for build plans, so I made a 23 page .pdf file you can have for $20 (This helps compensate for the 3 days it took me to make them). You can get them here:

Everything you need to know should be in the video, but the plans have templates for the stainless steel plates, a parts list with SKU numbers, pictures, instructions, and expanded view diagrams of the systems, including an alternate all ABS option.

Endcard Links:

H2O Explodes:
Power of the Sun:
Fire Piston:
Scorcher Frame:

Social Media Links:

Instagram:
Facebook:
Twitter:

Business Inquiries: For business and sponsorship inquiries please contact us directly:

WARNING:

This project should not be attempted without adult supervision and adequate training. Misuse, or careless use, of tools or projects may result in serious injury, property damage, and/or death. Use of this video content is at your own risk.

This is not a free energy device, over unity device, or a claim to be the solution to the worlds energy crisis. This is a project I did to experiment with the electrolysis of water, and the resulting gasses collected.

Music By: Kevin Macleod (Breakdown)

Project Inspired By:

Smack's Booster:

Project History & More Info:

The generator requires electricity to electrolyze H2O (water) into gas. The resulting mixed gas is sometimes referred to as Oxy-Hydrogen gas, which is 2 parts Hydrogen (H2) and 1 part Oxygen (O2). I typically hook this up to my car battery while the vehicle is running, so the alternator takes most of the load. On 12 volts I get about 1.5 liters/minute, but when I want to make the gas faster, I hook 2 car batteries in series for 24 volts, and this exponentially increases the gas production to over 5 liters per minute.

Current draw seems to be around 20-50 amps depending on whether you use 12-24 volts. High current draws mean the electrolyte heats up, and if left too long the plastic can warp or melt causing structural failure.

Some people ask why the plates aren't all electrically connected. The plates that aren't connected are called floater plates, or neutral plates. There is too much information to post about them here, so do a google search, or check out websites like for an in depth explanation of the theory.

I used KOH as my electrolyte because research suggested it was the best. I haven't experimented with other electrolytes, but have heard that salt, sodium hydroxide, vinegar, etc could work, but will dirty and may corrode the plates. Potassium Hydroxide keeps the system clean, however, it is caustic, so be careful if you choose to use it. You can probably get away with about 2-4 teaspoons of KOH per 6 liters of water.

This system produces an extremely powerful OxyHydrogen gas. When the gas is used, it simply turns back into water, and that's good for the environment. However I believe it takes more electric energy to produce the gas than is obtained from the gas. This device merely converts the energy from one form to another, with given losses.

As long as you have enough electricity, the amount of water already in this system is enough to produce thousands and thousands of liters of fuel. Some people say this is the fuel of the future. Either way, it's a very powerful gas!

If you need more information, or want to purchase build plans for this design, you can get them here:

How to Make Powerful Water Pump at Home

How to Make Powerful Water Pump at Home
This High pressure water pump is used for mini project were require high water pressure.You can make this water pump using PVC Joints.

Please Subscribe , Like , Comment & Press bell icon to get Notification.

Materials :
Dc Motor :
12 Volt 2 Amp Power Supply :
x

How To Use A Fire Piston

The fire piston is a very unique and effective device for making fire. This clever fire starter uses the rapid compression of air to create an internal temperature of over 500 degrees... hot enough to easily ignite char cloth, as well as certain natural materials found in-the-field. As with any fire-starting method, practice and knowledge of basic fire making principles are recommended prior to use. All-in-all, the fire piston is a great alternate, backup, or even primary means to get a fire going.
------------------------------------------------
You are welcome to connect with me on Facebook at:


Or on Instagram at:


Looking forward to interacting with you via these other social mediums my friends!
------------------------------------------------
**Closed**
Courtesy of our friends over at Campfirepiston.com, we will be giving away one of these awesome fire pistons. To enter simply leave a comment as usual and then include a line at the end that says Count me in. I'll randomly select a winner in a couple of weeks and get one of these fire piston packages out to someone. Thanks for playin' along ;-)
------------------------------------------------
You can check out these awesome fire pistons by visiting:

------------------------------------------------
Copyright 2013 -- IntenseAngler Outdoors -- All Rights Reserved

The Top 5 Mistakes to Avoid When Painting With Spray Paint

Hey guys! I’m Brad, and I make how-to videos. I do custom painting projects, guitar painting, airbrushing, spray can painting, wood working, and a variety of other finishing work and tutorials. Please subscribe and check out my channel for more!

In this video we discuss 5 of the most common mistakes that I hear about people making when spray painting. These are spray painting errors that amateur painters make regularly, and they lead to a wide variety of problems. Simply avoiding these few key things can save you a lot of time and trouble on your paint jobs, and keep you from having to repeat parts of them.

Don't forget to ask your questions in the comment section.

Thanks for watching.

To get in touch with me with your questions, photos, etc. use the links below!




How to Use Conventional Spray-gun Systems

There are several types of conventional spray systems. The low-pressure system uses a gun attached to the pot directly, and is used for smaller jobs requiring high degree of control.

The high pressure system pressurizes the paint and the air, and consists of a large pot, and hoses for the air and paint. This system is used for larger areas.

Both systems depend on a pressurized air supply from a compressor. The air is mixed with the paint at the orifice and atomises to create a fine even mist. Therefore, conventional spray systems are mainly used for solvent-based paints requiring a high quality fine finish.

Set --Up procedure

Attach the materials hose to the pot and tighten using a spanner.

Attach the materials hose to the spray-gun, then attach the air hose. Tighten both using a spanner

The amount of air can be adjusted by turning the air flow valve in or out.

The amount of paint can be controlled by adjusting the fluid control screw.

The fan control screw adjusts the fan width and pattern.

Pour the paint into the pot. Measure and add solvent to thin the paint according to manufacturers directions.Mix thoroughly

Secure the pot lid and tighten by hand.

Attach the air hose from the compressor to the pot. Adjust the regulator to the desired pressure. This is usually about 45 -60 psi.

Application Procedure

Use the correct respirator filter for the product.

Apply the paint using an even side-to-side motion. The gun should be kept at an even distance from the surface at all times, and the spray-gun should be kept moving the entire time. Overlap each stroke by 50%.

The air-cap can be adjusted to direct the spray-pattern vertically, or horizontally. This is done by simply twisting the cap.

Regularly check the finish to ensure the paint is being applied evenly and sufficiently.

Application techniques

It is better to build up the coating with several coats than to apply one heavy coat. Insufficient movement of the gun will result in a high build up of paint, leading to sagging and runs.

The gun should be maintained at a constant distance from the surface, and the spray pattern should be an even, slightly oval shape.

Pull the trigger just before the spray-gun passes over the surface, and release it after a full pass of the surface. Do not start or stop half-way across the surface. Keep the gun moving at all times.

Clean-up procedures

On completion of the work, release the pressure on the pot. You should be able to see the pressure drop by checking the regulator guage. Once the pressure is released, open the pot lid.
Pour the excess paint back into a suitable container.

Clean the pot using a compatible solvent. Spray solvent through the gun until it sprays clear.

Clean the air cap and remove the needle. Once the needle has been cleaned replace it. All paint should be cleaned carefully from the gun to ensure trouble-free service. However, do not immerse the gun in solvent.

To find out more about conventional spray-gun systems and for courses and training see

Hunting Slingshot Rifle How Set Fish Wheel Dart - Ready to Hunt - Most detailed video Slingshot Gun

USA ebay :
UK ebay:
(1) when use the slingshot rifle to play metal fishing arrow, before tap your trigger, please keep the fishing reel is open, also need to keep fish line is smooth, Line can not be knotted.
(2) please double check this carefully, otherwise the fish arrow will not be launched out and it is probably to jump up.
(3) after arrow reloaded, please do not point muzzle to any people. once arrow fly out, the fishing line becomes a wing to hold the bottom of arrow. Keep the arrows flying straight, kinetic energy is be real powerful.only adult could play fishing arrow, also, if you are not familiar with slingshot rifle, before a good training with skill, for the safe sporting, please don't play fishing arrow. safe playing...

Music : Big Sciota, wish everyone like ^_^

How To Tell WHY Your Piston is Destroyed - Video

How to analyze the failed piston to determine the cause. Why is my piston scored on my chainsaw? Applies to 2 stroke, 2 cycle lawn and garden equipment, including weedeaters, trimmers, leaf blowers etc...

Get new piston kits here---

Click here for my website---

Click here for my Parts and Tools Store----

If I saved you some money with this video, please consider supporting my efforts with a donation-----

Don’t forget to SUBSCRIBE here----

Don’t forget to click the ???? to turn on Video Notifications for more money saving videos, featuring all the top brands like Stihl, Husky, Husqvarna, Echo, Honda, Briggs and Stratton, John Deere, Craftsman, MTD, AYP, etc.

Learn how to properly fix or repair your own outdoor power equipment if it won’t start, bogs out, won’t rev up, chain or blade is dull and doesn’t cut good, needs sharpened, or simply just runs poorly.

Simple and basic, do it yourself (DIY) tutorials to help you with your broken lawn and garden equipment.

I do my best to teach you how I easily diagnose problems the fastest, quickest and most efficient way.

Whether it be a handheld, two stroke, two cycle engine like chainsaws, weed eaters, string trimmers, grass trimmers, line trimmers, hedge trimmers, strimmers, brush cutters, leaf blowers, or four stroke, four cycle units like lawn mowers, pressure washers, generators, ride on mowers that need parts installed or replaced, I’m your guy.

I’ve been a small engine mechanic for many years so my videos are loaded with tips and tricks that I have learned and want to pass on to you. I want Steve’s Small Engine Saloon to SAVE YOU TIME, FRUSTRATION AND MOST IMPORTANT, MONEY!

If you Google your issue, problem or symptom, you may just see one of my videos pop up! If you have an idea or suggestion for a video, please fill out this form----

Disclosure: This YouTube video is provided for informational purposes only. Steve is a qualified small engine mechanic and is working in an open and fully ventilated shop for the purpose of making this video. Small engines should be operated outside in fully ventilated areas only and it is important that you wear the appropriate safety gear. If you choose to try one of the suggestions made in this video, you do so at your own risk. Please ensure that you take all proper safety measures before attempting any project.

Shares

x

Check Also

x

Menu